Pair of Betor Pro Elite Aluminium Trials Shocks - 360mm

PAIR of Betor Pro Elite Trials Rear Shocks

1 pair - 14.17" - 360mm

The Pro Elite range has the following features -

• 4.1" (105mm) Travel

• Click adjustable damping 21 clicks set on 2 as standard
  

• 15mm damper rod (standard is 11mm)

• Spherical Bearing in both eyes

• 14.17" - 360mm

• Also available in 340 - 350 - 380 & 400mm lengths

• Other lengths available by special order

• Damper bodies are steel with a chrome finish

• Choice of 40lb or 50lb spring

• 65lb spring also available (mainly for MX/Enduro use)

• Can also be used for classic MX by winding the damping right up and fitting the 65lb spring

• Damped using a combination of Oil & Nitrogen - Each has its own chamber

• Fully rebuildable

• 12mm eyes at either end, we can offer alternative sizes on request.

• Can be used either way round with stickers supplied loose so you can fit them the correct way

• Ready to fit and use
  

• The spring is infinitely adjustable by means of a screw thread. We set the springs length at 250mm before shipping, this is a good place to start.

• New Stronger rebound damper

• 12 Month Warranty against failure (not including accidental damage)

Specifically developed for us in Spain by the great Carlos Fandango now he has moved on from making wide wheels.

We had a pair of these tested at the Pre65 Scottish this year by Chris Gascoigne and he finished in a very credible 11th place with 11 marks dropped over the 2 days. This was Chris' best result ever and at a post event interview I asked him what he thought of the shocks, one word 'Brilliant' was his response.

We fit these to all our TY125 & TY175 bike as the extra length not only increases ground clearance but improves the steering quite dramatically. The only modifications that needs done is to drop the forks in the yokes so the chrome slider is level with the top of the yoke and extend the sidestand by 20mm.

Also standard length for the following bikes -

Kawasaki KT250

CCM / Armstrong 250 / 320

Montesa Cota 248 & 349

Fantic 240 - 300

I have also got this length fitted on my 1967 Bultaco Sherpa T Model 27 following some advice given to me personally by the certain Irish chap who developed the bike in the first place!

Lovely smooth action with 'Brilliant' damping characteristics

Ideal for the novice, clubman and expert although we find experts can ride with 2 rods welded on the back and still win but us with lesser abilities need all the help we can get

With valve for re-gassing

Please note:- NEVER touch the valve unless you are re-gassing the shock they are not adjustable!

Please note:- if you have a WES or other aftermarket silencer the right side shock may need to be spaced out a bit so the adjuster clears the aluminium

Prices include VAT at the standard rate - VAT will be removed at basket/checkout for international & Channel Islands orders

Postage prices are charged by weight and this can be checked at any time by following the instructions below.

Add item(s) to your basket and then click the basket link that appears in the shopping basket box top right ↗↗.

This will take you to your shopping basket where you select you shipping country and the postal charge for your item(s) will be displayed.

Please remember that you are not committing yourself to buy the item(s) until you complete checkout. Even then, if you change your mind, no problem we’ll just delete it!

For details of how to pay us please click link below

HOW TO PAY US

Buyers outside the UK get 16.66% discount on published prices, excluding postage. This is removed once you enter the destination country at the checkout

You guys don't have to pay the vat!