30. Drive Shaft Bearing - TY250 Twinshock

Trials Trail & Enduro Parts > 1. Yamaha TY Trials Parts > 4. TY250 Twinshock Parts > Transmission

18. Drive Shaft Bearing - TY250 Twinshock

  • 30. Drive Shaft Bearing - TY250 Twinshock

  • OEM Bearing for the output shaft
  • £10.38
    inc. VAT (where applicable)

:  at  £10.38  each


Yamaha Genuine Parts
 
Drive Shaft Bearing

OEM Bearing
 
Output shaft bearing manufactured to C3 specification which relates to the tolerances required for the speed and temperature this bearing runs at.

This bearing has slot in the outer race complete with clip. The clip is required to hold the bearing in the case. If you fit a bearing without the clip then  damage can be caused  to the gears as they can engage with the wrong gear due to the sideways movement.

The clip on this bearing goes to the inside of the case and is held in place by the bearing retainer #28 on the parts page.

There are other bearings of this size available with a different  bearing specification that are cheaper but not up to the job and will fail.

Manufactured by NTN, NSK or Koyo depending what is available, both are OEM bearings, check the ones you take out.

Beware cheap bearings from the far east!

When fitting or removing this bearing remember the crankcase has to be REALLY hot. Rule of thumb is if you spit on the cases and it just rolls off rather than evaporating the cases are hot enough. The driveshaft has to be fitted with the rest of the gearbox and will drop into this bearing even when the case has cooled, the worst it will need is a tap on the end from a very small hammer.

There are a number of ways to get the casing hot enough.

1. Bake in the oven for 20 minutes, the wife may not like this though!
2. Blow torch for about 10-15 minutes
3. Our preferred option is to use a hot air gun, the paint stripping type for about 10-15 minutes per case. Much safer option and keeps the workshop nice and warm on the cold winter days!

Standard equipment on all years and models of TY250 Twinshock including 320, 340 & 360 Majesty.

Prices include VAT at the standard rate - VAT will be removed at basket/checkout for international & Channel Islands orders

Postage prices are charged by weight and this can be checked at any time by following the instructions below.

Add item(s) to your basket and then click the basket link that appears in the shopping basket box top right ↗↗.

This will take you to your shopping basket where you select you shipping country and the postal charge for your item(s) will be displayed.

Please remember that you are not committing yourself to buy the item(s) until you complete checkout. Even then, if you change your mind, no problem we’ll just delete it!

For details of how to pay us please click link below

HOW TO PAY US

 

Buyers outside the UK get 16.66% discount on published prices, excluding postage. This is removed once you enter the destination country at the checkout

 

You guys don't have to pay the vat!

Customers Also Bought